Description

Lower Cowling (GRP), MC21, MC28, GP-T, Assy.

This product is designed to be used with BPFU-9033 as part of the Bodywork set BPFS-0137.Designed in-house by TYGA Performance and using 15 years experience of developing fairings for the NSR250, this fairing is lightest and most stylish yet. The design allows for the extra width of an HRC radiator while at the same gives maximum clearance with the track at high angles of lean. Other features include a vent underneath and high quality lamination by our skilled craftsmen. Weight is under 1 kg but strength retained using high strength epoxy resins and good design.

See also carbon version BPCL-9033.

It is supplied with spacers to place between fairing and rear lower mounts to ensure clearance with exhaust chambers.

Compatible products:

This product must be used with BPFU-9033

This lower cowling is designed to be used with stock or race exhaust systems though some spacing may be necessary to get clearance with chambers:

1. stock systems, fit with no spacing but will need a small part of the indent on the lower vent removed to clear the chamber. We can modify the lower to fit the stock chambers if requested
2. Tyga chambers require some spacing but no cutting. On some systems (particularly MC28) no spacing is necessary
3. Other systems, can not advise, but should require only spacing or possibly cutting of front of lower where front cylinder header exits.